| Type: | LAMBDA OMNICOLL – microprocessor-controlled programmable fraction collector – sampler |
| Collection mode: | Linear (line), meander (zigzag) or row collection |
| Normal modus: | |
| Time: | 0.1 to 999.9 minutes (16.67 hours) in 0.1 min steps or 1 to 9999 minutes (166.7 hours) in 1 min steps |
| Volume: | 0.01 to 500 ml or 0.6 to 30 litres (external counts using LAMBDA peristaltic pump) |
| High modus: | same as Normal modus, but with a pause between fractions (from 0.1 to 999.9 minutes or 1 to 9999 minutes) |
| Remote control: | |
| Normal modus: | Collector takes a single fraction after an external voltage pulse of 3-12 V (or 12-30 V with a 3300 ohm resistor) |
| High modus: | Collector takes a 1 to 999 fractions after a single external voltage pulse of 3-12 V (or 12-30 V with a 3300 ohm resistor) |
| Capacity: | Any tube rack or container type with a surface smaller than 45x31cm |
| Using supplied racks: | 360 tubes of 12-13 mm diameter
240 tubes of 16 mm diameter
160 tubes of 20 mm diameter
96 tubes of 30 mm diameter
The capacity can be increased many times by coupling several lower fraction collector parts together. |
| Non-volatile memory: | storage of all settings |
| Interface: | RS-232 (optional) |
| Power supply: | 95–240 V/60–50 Hz AC plug-in power supply with DC
9V/12W output; possible field operation on 12 V accumulator |
| Dimensions: | 34 (W) x 30 (H) x 49 (D) cm |
| Weight: | 6.5 Kg |
| Safety: | CE, meets IEC 1010/1 norm for laboratory instruments |
| Operation temperature: | 0-40 °C |
| Operation humidity: | 0-90% RH, not condensing |
| Remote control: | 0-10 V; (option 0-20 or 4-20 mA) |
| Fuse: | 1.5 A (on printed circuit board) |