Măsurarea și reglarea precisă a fluxului de gaze
Măsurarea și reglarea precisă a fluxului de gaze
Special conceput pentru folositrea cu bioreactorul sau fermentatorul LAMBDA.
Proiectat special pentru utilizarea cu bioreactoare LAMBDA sau fermentatoare. De exemplu, permite reglarea pH-ului culturii celulare prin adăugarea de CO2 controlat, care reglează oxizii dizolvați prin reglarea debitului. De asemenea, poate fi folosit separat, deoarece toate funcțiile pot fi controlate de la panoul de control.
| Debit | MASSFLOW 5000: 0 – 5 l/min , diviz. 10 ml/min MASSFLOW 500: 0 – 500 ml/min diviz. 1 ml/min |
| Calibrare | Nitrogen/aer |
| Precizie | ±3 % |
| Repetabilitate | ±0.5 % |
| Temperatura de operare | 0 to 50 °C |
| Presiunea maxima | 0.2 MPa |
| Dimensiuni | 105 × 80 × 170 mm (WxHxD) |
| Greutate | 800 g |
| Alimentare | 90-240 V / 50-60Hz, output 12 V DC |
| Telecomanda | 0-10 VDC (intreaga scala); ON/OFF; RS-485 or RS-232 (optional) |
| Garantie | 2 ani |
Dacă aveți Întrebări, Contactați-ne pentru mai Multe Informații.
Contactează-ne
Type: LAMBDA MASSFLOW – microprocessor-controlled gas flow controller (controller only) and gas flow meter
Accuracy: ± 3% reading or 1 digit
Repeatability: ± 0.5 % reading or 1 digit
Flow range:
MASSFLOW 5000: 0 - 5.00 l/min in 0.01 l/min steps (controller)
MASSFLOW 500: 0 - 500 ml/min in 1 ml/min steps (controller)
MASSFLOW 5000-s: 0 - 5.00 l/min in 0.01 l/min steps (meter only)
MASSFLOW 500-s: 0 - 500 ml/min in 1 ml/min steps (meter only)
MASSFLOW 500-hs: Auto-range: 0 - 99.9 ml/min in 0.1 ml/min steps and 100 - 500 ml/min in 1 ml/min steps (meter only)
Calibration: N2/Air (pre-calibrated sensors for other gases available on request)
Non-volatile memory: storage of all settings
Maximum pressure: 0.2 MPa (2 bar)
Power supply: 90–240 V/50–60 Hz AC plug-in power supply with DC 12V/24W output; possible field operation on 12 V accumulator (Plug types: AU, CH, EU, UK, US)
Interface: RS-485 or RS-232 (optional)
Remote control: 0-10 V; (option 0-20 or 4-20 mA); ON/OFF (controller only)
Dimensions: 10.5 (W) × 8 (H) × 17 (D) cm
Weight: 800 g
Safety: CE, meets IEC 1010/1 norm for laboratory instrument
Operation temperature: 0 – 40 ⁰C
Operation humidity: 0-90% RH, not condensing
Accuracy: ± 3% reading or 1 digit
Repeatability: ± 0.5 % reading or 1 digit
Flow range:
MASSFLOW 5000: 0 - 5.00 l/min in 0.01 l/min steps (controller)
MASSFLOW 500: 0 - 500 ml/min in 1 ml/min steps (controller)
MASSFLOW 5000-s: 0 - 5.00 l/min in 0.01 l/min steps (meter only)
MASSFLOW 500-s: 0 - 500 ml/min in 1 ml/min steps (meter only)
MASSFLOW 500-hs: Auto-range: 0 - 99.9 ml/min in 0.1 ml/min steps and 100 - 500 ml/min in 1 ml/min steps (meter only)
Calibration: N2/Air (pre-calibrated sensors for other gases available on request)
Non-volatile memory: storage of all settings
Maximum pressure: 0.2 MPa (2 bar)
Power supply: 90–240 V/50–60 Hz AC plug-in power supply with DC 12V/24W output; possible field operation on 12 V accumulator (Plug types: AU, CH, EU, UK, US)
Interface: RS-485 or RS-232 (optional)
Remote control: 0-10 V; (option 0-20 or 4-20 mA); ON/OFF (controller only)
Dimensions: 10.5 (W) × 8 (H) × 17 (D) cm
Weight: 800 g
Safety: CE, meets IEC 1010/1 norm for laboratory instrument
Operation temperature: 0 – 40 ⁰C
Operation humidity: 0-90% RH, not condensing
- EN - MASSFLOW gas flow controller - Leaflet (pdf)
- EN - MINI-4-GAS, the automatic gas mixing module (pdf) (pdf)
- EN - User Guide: MASSFLOW gas flow controller and meter (pdf)
- CZ - LAMBDA MASSFLOW regulátor a měřič průtoku plynu - leták (pdf)
- DE - MASSFLOW Gasfluss messen & regeln - Broschüre (pdf)
- ES - LAMBDA MASSFLOW - caudalímetro de gas - folleto (pdf)
- ES - Manual de Operaciones del Controlador de flujo de gases y caudalímetro MASSFLOW (pdf)
- FR - Régulateur de débit de gaz LAMBDA MASSFLOW - brochure (pdf)
- FR - Mode d'emploi - LAMBDA MASSFLOW régulateur de débit et débitmètre (pdf)